2218 Orchard Street New Prague, MN 56071 Stefa@owlandliongallery.com 952-758-6947

More Than Meets The Eye.

Printing and Binding

Binding Hardcover Books for Kids

The quality and durability of book binding process is nationally recognized. Whether your book is a hard cover children’s book, a soft cover.Stack Your Paper Neatly in (at Least 4) Piles of 8 Sheets. Fold Each Stack in Half. Unfold the Paper and Turn Over. Staple the Pages Together. Glue the Binding Onto the Folios. Trim the Bound Folios. Mark and cut out the cover boards, make the book spine.

How to Print Your Own Book at Home

Printing your own book at home can be one of the greatest ways of creating a fully customized gift for someone special. However, it can also serve as a tool for preserving your very own work or online content. For beginners into book printing, this might appear a little challenging but there is good help available in this category.

Decide on the Content of the Book

This is one of the most important and the most basic steps that you need to take when trying to print your own book at home. Always keep in mind that a book that is put together very well serves as the perfect customized gift. For the ones who do not want to print books at home to be given away as gifts, the overwhelming task of going through a backlog of articles can be easily done away with by tackling it in book form.

Make the Effective Use of Your Computer

One of the best things that you can do to print your own book at home is make use of your computer. Use the word processing software for printing your own book without going through any kind of hassle. The only thing that you will have to do is start a new project in the word processing software.

Setting the Margins Right

Once you are done with the procedure of opening the word processing software on your computer and starting with a new project, it is time for you to set the page margins. Make sure to set the page margins right for the entire document top, left and bottom. When setting the page margins, it is important for you to keep in mind that you have to leave some space for binding.

Headers and Footers are Important

Next, you need to set the headers and the footers. Your header will be a small text showing right at the top of every page in your project. The footer, on the other hand will be showing at the bottom of every page. It is essential for you to be very careful when setting the headers and the footers. Remember that the footer for a page is optional and you can either choose to have it or remove it from your document.

Do Not Forget Numbering

Your pages should have numbers so that you can avoid any kind of confusion when printing the book. Make sure that there is numbering on each and every page of your document and it must appear right at the top of the page. It is also important for you to designate the very first page of your document as title page. This page should have the name of the book along with the name of the organization that you are serving or your own name in the author section. These are some of the most essential steps that you need to follow when printing your own book at home.

Take Your Time

Do not rush with the printing procedure. Take your time and once you gain good skills, printing additional books would not be very challenging for you. Initially, you might have to face a number of difficulties but this should not stop you from trying until you achieve success in this endeavor. For the best results, choose a small book printing project first and then when you gain good skills, move on to try your hands on bigger projects.

Conclusion

This brief guide on how to print your own book at home will help you in getting started with your book printing procedure. However, it is important for you to use your own ingenuity and imagination when it comes to book printing.

Book Printing Tips For Newbies

Book printing is a dream for many people. With major advancements made in the field of technology, people can live this dream. Newbies in this field can learn about book printing alternatives through commercial printers and produce books as per the specifications they require. Check out our 7 book printing tips for more information for more experienced writers. Some book printing tips for newbies are:

Getting the Basics Right

This is quite simple. You simply need to communicate the very basics of the book printing project like final trim size, page count and quantity. This will help you in coming up with an estimate.

Proper Book Planning

It is also essential for newbies to be careful about book delivery date. Newbies into book printing need to be clear about the delivery date. Once you are aware of the date within which the printed books are required, you can easily create a kind of production schedule for meeting the deadline.

Keep the Size of the Text Readable

It is always very important to pay attention to the text size of a book. When printing a book, you must never attempt at keeping the text size small. The text size of a book should be kept normal so that it is easy for the readers to go through the matter of the book without facing any problems. Remember, if the book reader has to make use of a magnifying glass then the usefulness of your book might greatly diminish.

Line Spacing is an Important Concern

While keeping the text at readable size it is also important to aim for proper contrast. It is also necessary to make use of proportional page margins and line spacing in order to avoid making the text appear too crowded on the book pages.

Go for Round Corners Always

Majority of the books available in the market are meant to be used frequently. Therefore, it is essential to round the corners of the pages and the cover of the book for increasing its durability. Rounding the corners of the pages and the cover of a book will avoid the corners from bending backwards. Rounded corners not only help in reducing the chances of dog-eared pages and snags but they also help in maintaining the professional look of a book.

Book Size is also an Important Factor to Consider

This is probably the very first tip that newbies need to follow when trying to print books. It is very important to decide on the size of the book that you are about to print. There are varied sizes available for varied purposes. You can either go for manuals, mass markets or handbooks as per your choice and requirement. Ensure making a choice that helps you in enhancing the overall appeal and appearance of the book.

Know Your Printing Method

There are basically three varieties of book printing and they are lithography printing, digital printing and web press. You need to make the choice of the printing method that you want to use for printing a book as per your preference, skill and the availability of the right resources. For example, there is no use in going for the lithography printing method when you do not have any idea about this method. Basically, if you do not have good skills in different printing methods, go for the one that you are best at.

Conclusion

Printing a book does not just mean placing ink on paper. It involves different aspects that have a major influence on the overall appearance of a book. It is therefore important for you to approach all the important aspects of book printing very carefully. This will help you in coming up with the best-printed book even if you are a newbie into printing books.

7 Book Printing Tips

Book printing is an art that has evolved over time. It is an ancient art that has changed over time. Its inception has a long history and its evolution has an interesting story. There are several methods that can be applied in the course of printing a book, but for printing a book properly some specific steps should be followed in a thorough manner. I had the pleasure of speaking with Ed Corvelli from Easy Street Print, the go-to book printer NYC residents use. He ran me through some book printing basics.

Getting back to the basics is the first tip that should be adhered to in order to print a book perfectly. To complete this first step a printer has to gather some basic information like page count, quantity and the final trim size of the book. Such information is needed to determine price estimation. One must take into account the fact that one of the basic step is to plan the book printing and such planning beings with the delivery date. The blocking time on appropriate presses and other equipment are included in the planning process, and along with this, ensuring the proper availability and supply of paper is also a part of the basic planning process.

The second tip is entirely related to the prior page count. It is to be noted that book pages are usually printed as signatures or multiple pages that are laid out on a single sheet of paper. And that is the reason why page counting becomes necessary. Common trim sizes are designed to fit 8 to 32 pages on each sheet, and that is yet another reason why prior page count is essential in a thorough manner.

The third tip is that, you have to consider the formatting of your book on a prior basis. It must be noted that oblong layouts can be less economical to produce and hence, you have to make your printer aware of the fact that whether or not your book will be bound in portrait or in landscape format.

The fourth tip is that the printer has to always keep in mind that there is a difference between page counts and sheet counts. It must be noted that in the printing world, page refers to one side of a whole sheet and therefore, a book with 100 pages would require 50 sheets. As this can be confusing and could cause confusion between the designers and printers, it is your responsibility that you count your book’s pages on a prior basis in an effective manner. You have to inform the number of pages to be printed and not the number of sheets.

To have paper in stock properly is the fifth tip. You must consult with your printer about the quality and texture of papers that are going to be used to print the book. For both the text pages and cover of the book, you should consult with your printer on a prior basis so that no confusion arises in the long run. Usually printers maintain an inventory of house stocks and you should encourage your printer to do the same. You must supply your printer will all the printing specifications because this would allow you to make appropriate recommendations for inks and for coatings.

As for the sixth tip, you have to keep in mind the fact that, there are certain aspects that should be communicated to your printer which include ink coverage, bleeds and areas of critical registration.

Finally, you have to determine the method of book binding. You have to inform your printer if he/she is going to provider in-house binding services. You must also inform if you prefer a particular binding method for your project. Such information alleviates the degree of confusion in the long run.

How to Bind a Book in 10 Steps

Book binding is an art – an ancient art that has evolved over the centuries. There are different steps that must be completed in order to bind a book. Different methods and procedures are related to the binding of book and for binding a book properly any one of those methods and procedures must have to be followed.

The primary step related to binding a book is setting up the template. Setting up the template first indicates the inception of the process of binding a book. The first step of setting up the book’s page template by creating a new document under the Design section is a crucial one. Though the page size, columns and margins will depend on your own preferences, you must remember to add an extra 10mm to accommodate the stitching and 3mm bleed. The 3mm bleed would come to work if you intend to print to the edge of the page. It must also be ensured that the Facing Pages box is properly ticked and you are able to view the design as a spread.

The second step in book binding is to print the pages properly. If you are ready to print, export document in the PDF format and you have to tick Crop Marks under Marks and Bleeds, and for this you have use document bleed settings. As the pages need to be printed on both the sides, you have to ensure whether it is going to be manually printed with all odd pages or not. Moreover, though you can cut through multiple pages at a time the process would rely on the number of pages and the paper stock that you would be using.

The third step is to prepare for the stitching. In this step you have to you have to draw a line from the top to the bottom of the page and the measurement usually should be 5mm in from the spine, and this would be the spot in which the pages would be stitched. A line must be drawn and dotted for about 10mm from the top and one 10mm from the bottom, and after this step, you have to put evenly spaced dots in between those spots.

In the fourth step, three holes spaced roughly 5cm apart should be made and this would be adjusted to the height of the page. The top of the pages should be tapped against a flat surface to ensure that they are flush, and laying them flat the dots should be pierced using a bookbinding awl.

The fifth step would be to conduct the actual stitching. A linen thread and a bookbinding needle should be needed to start stitching. You should thread your needle, piercing the thread by 1cm from the end and pulling it tight instead of tying a simple knot.

The sixth step would be to glue the spine. He book must be placed between two clean boards so that the pages could be pressed and made flat. With a fine layer of PVA glue the spine must be pasted and it should be left for about 20 minutes to dry.

In the seventh step, the spine has to be lined. The spine must be lined once the pages are cropped, measured and cut into a piece. The spine should be at the same length as the pages and the stitches on both sides must be covered with a few mm to spare.

In the eighth step, the endpapers should be attached. To the main body of the book, the two endpapers must be attached and this would be covered and wrapped around. They should be twice the width of the book and same as the book’s height.

The cover of the book must be created in the ninth step, and in the final step, it should be attached to the book. Remember, bookbinding is a true art, and it takes a lot of practice and patience to achieve good results. Check out our home page for more great tips.

What Do You Know About Perfect Binding?

One of the most widely used cover book binding method is Perfect Binding. It is that genre of binding method in which the pages and covers are glued together at the spine and it is done so in a strong but flexible thermal glue. After this gluing, the other three sides of the book are trimmed as needed and this is to give clean and perfect edges.

On the shelves of myriads of bookstores there are many soft cover books and those books should be considered as good examples of perfect bound books. The square, printed spine and the paper back cover or the cover made of cardstock (which is heavier than the interior pages) are the usual hallmarks of perfect bound books. It must be noted that usually the cover is clear coated not only to provide an improved appearance but also to enhance durability of the book.

Perfect binding gives a professional look and it’s low cost and that’s some reasons why authors, businesses, and different types of organizations use the perfect binding method in a variety of their printing projects. For annual and corporate reports, perfect binding method is used quite widely and it is also a suitable method for making manuals and catalogues. For thicker product brochures and in printing magazines too, the perfect binding method is usually used.

There are myriads of advantages and benefits of applying the perfect binding method. The first and foremost benefit of perfect binding is that the method makes the books look more professional and this attributes the books with a visual appeal. Moreover, perfect bound books are less expensive that hardcover books as their production method is less costly than that of the hardcover method. Perfect binding books also stack well. The perfect binding method helps in forming a square spinal edge this allows for the book’s title or other related information to be printed on the spine and such is offered neither by stitch nor by spiral binding methods. For on demand printing and in the short runs, the perfect binding method is more suitable and fitted. For cost-conscious businesses and for authors, such usability makes a great appeal.

The perfect binding method (a favorite of owl and lion gallery) follows a particular process of binding. The printer first stacks the interior pages together and such stacking forms a crisp block. The spinal edge of the block is then roughed up either with blades or with abrasives and this exposes more paper fibres and this in turn increases the bounding area for the glue. The roughed up edge of the interior page block are then introduced to glue. And this glue is actually the hotter one. After this process is over, the cover of the book is wrapped around the block of pages and this block adheres to the glue all along the spine. The next step in this binding method is to wrap the cover of the book around the block of pages along the spine. The three open edges of the book are trimmed after the glue cures and this is usually needed to give the book nice clean edges. Perfect binding is thermally activated binding and it is often used to give a result similar to paperback books. It is to be noted that paperback or soft-cover books are usually bound through the usage of the perfect binding method and in this method a strong glue plays a crucial role. A heavier paper makes the cover in the perfect binding process and the binding process involves the formation of various sections. The sections are glued together at the spine and that also with a strong glue.